We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Crafted with all the benefits of the MSO-2102EA, the MSO-2104EA from GW Instek offers 4 channels with a maximum 1GSa/s maximum real time sampling rate.
View the GW Instek MSO-2102EA 100 MHz 2-Channel Digital Storage Oscilloscope here.
*Quick start guide, user manual CD, 1 power cord, 1 GTL-16E 6-channel logic analyzer probe and 1 (per channel) GTP-100B-4 switchable passive probe included.
Channels | 4ch |
Bandwidth | DC~100MHz |
(-3dB) | |
Rise time | 3.5ns |
Bandwidth Limit | 20MHz |
Vertical Sensitivity | |
Resolution | 8 bit |
:1mV~10V/div | |
Input Coupling | AC, DC, GND |
Input Impedance | 1MΩ// 16pF approx. |
DC Gain Accuracy | ±(3%)when 2mV/div or greater is selected
±(5%)when 1mV/div is selected; |
Polarity | Normal & Invert |
Maximum Input Voltage | 300Vrms, CAT I |
Offset Position Range | 1mV/div ~ 20mV/div : ±0.5V |
50mV/div ~ 200mV/div : ±5V | |
500mV/div ~ 2V/div : ±25V | |
5V~10V/div : ±250V | |
Waveform Signal Process | +, -, ×, ÷, FFT, FFTrms ,User Defined Expression. |
| FFT:1Mpts |
Trigger | |
Source | CH1 ,CH2, CH3, CH4, Line, EXT* |
*dual channel models only | |
Trigger Mode | Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence |
Trigger Type | Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus |
Holdoff range | 4ns~10s |
Coupling | AC,DC,LF rej. ,HF rej. ,Noise rej. |
Sensitivity | 1div |
External Trigger | |
Range | ±15V |
Sensitivity | DC ~ 100MHz Approx. 100mV |
100MHz ~ 200MHz Approx. 150mV | |
Input Impedance | 1MΩ±3%~16pF |
Horizontal | |
Time base Range | 1ns/div ~ 100s/div (1-2-5 increments) |
ROLL: 100ms/div ~ 100s/div | |
Pre-trigger | 10 div maximum |
Post-trigger | 2,000,000 div maximum. |
Time base Accuracy | ±50 ppm over any ≥ 1 ms time interval |
Real Time Sample Rate | Max.:1GSa/s |
Record Length | Max:10Mpts |
Acquisition Mode | Normal, Average, Peak Detect, Single |
Peak Detection | 2ns (typical) |
Average | selectable from 2 to 256 |
X-Y Mode | |
X-Axis Input | Channel 1; Channel 3 |
Y-Axis Input | Channel 2; Channel 4 |
Phase Shift | ±3° at 100kHz |
Cursors and Measurement | |
Cursors | Amplitude, Time, Gating available; Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%) |
Automatic Measurement | 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements |
Control Panel Function | |
Auto counter | 6 digits, range from 2Hz minimum to the rated bandwidth |
Autoset | Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset |
Save Setup | 20set |
Save Waveform | 24set |
Display | |
TFT LCD Type | 8" TFT LCD WVGA color display |
Display Resolution | 800 horizontal × 480 vertical pixels (WVGA) |
Interpolation | Sin(x)/x |
Waveform Display | Dots, vectors, variable persistance (16ms~4s), infinite persistance |
Waveform Update Rate | 120,000 waveforms per second, maximum |
Display Graticule | 8 x 10 divisions |
Display mode | YT ;XY |
Interface | |
USB Port | USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 |
Ethernet(LAN) Port | RJ-45 connector, 10/100Mbps with HP Auto-MDIX |
Go-NoGo BNC | 5V Max/10mA TTL open collector output |
Kensington Style Lock | Rear-panel security slot connects to standard Kensington-style lock. |
Logic analyzer specifications | |
Sample Rate | Per Channel 1GSa/s |
Bandwidth | 200MHz |
Record Length | Per Channel 10M pts (max) |
Input Channels | 16 Digital (D15 - D0) |
Trigger type | Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus |
Thresholds Quad | D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds |
Threshold selections | TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined |
User-defined Threshold Range | ±5V |
Maximum Input Voltage | ±40 V |
Minimum Voltage Swing | ±250 mV |
Vertical Resolution | 1 bit |
AWG Specifications | |
Channels | 2 |
Sample Rate | 200 Msa/s |
Vertical Resolution | 14 bits |
Max. Frequency | 25 MHz |
Standard Waveform | Sine, Square, Pulse, Ramp, DC, Noise |
Built-in ARB Waveform | Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac |
Output Range | 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω |
Output Resolution | 1mV |
Output Accuracy | 2% (1 kHz) |
Offset Range | ±2.5 V, HighZ;±1.25 V, 50 Ω |
Offset Resolution | 1mV |
Sine | |
Frequency Range | 100mHz to 25MHz |
Flatness | ±0.5 dB( relative to 1kHz) |
Harmonic Distortion | -40 dBc |
Stray (Non-harmonic) | -40 dBc |
Total Harmonic Distortion | 1% |
S/N Ratio | 40 dB |
Square/Pulse | |
Frequency Range | 100mHz to 15MHz |
Rise/Fall time | <15ns |
Overshoot | <3% |
Duty cycle | Square:50%;Pulse:0.4%~99.6% |
Min. Pulse Width | 30 ns |
Jitter | 500 ps |
Ramp | |
Frequency Range | 100mHz~1MHz |
Linearity | 1% |
Symmetry | 0 to 100% |
Miscellaneous | |
Multi-language menu | Available |
operation environment | Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C. |
On-line help | Available |
Time clock | Time and Date ,Provide the Date/Time for saved data |
Dimensions | 384mmX208mmX127.3mm |
Weight | 3kg |
- Automotive Electronics
- Educational Courses
- ICT Product Design
- Embedded Circuit Design