We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
GW Instek has introduced their MSO-2000 Series of mixed signal oscilloscopes with their model MSO-2072E. Equipped with a built-in 16-channel logic analyzer, the MSO-2072E features a bandwidth of 70 MHz and dual analog channels that generate 1GSa/s real-time sampling rates per channel.
Users can effectively recall and examine waveforms with the 10M long memory, while still having the versatility to choose between 1K, 10K, 100K 1M or 10M memory capacities as applications require. Even more, the MSO-2072E is outfitted with waveform search and segmented memory functions; allowing users to immediately find needed waveforms based on required trigger conditions and to quickly store and display desired waveforms.
Constructed with a 8 inch 800*480 TFT LCD and minimum 1mV/div vertical range to easily measure and present complex feeble signals, GW Instek's MSO-2072E is the leading choice for an economical multi-functional oscilloscope.
*Quick start guide, user manual CD, 1 power cord, 1 GTL-16E 6-channel logic analyzer probe and 1 (per channel) GTP-070B-4 switchable passive probe included.
Channels | 2ch+Ext |
Bandwidth | DC~70MHz |
(-3dB) | |
Rise time | 5ns |
Bandwidth Limit | 20MHz |
Vertical Sensitivity | |
Resolution | 8 bit |
:1mV~10V/div | |
Input Coupling | AC, DC, GND |
Input Impedance | 1MΩ// 16pF approx. |
DC Gain Accuracy | ±(3%)when 2mV/div or greater is selected |
±(5%)when 1mV/div is selected; | |
Polarity | Normal & Invert |
Maximum Input Voltage | 300Vrms, CAT I |
Offset Position Range | 1mV/div ~ 20mV/div : ±0.5V |
50mV/div ~ 200mV/div : ±5V | |
500mV/div ~ 2V/div : ±25V | |
5V~10V/div : ±250V | |
Waveform Signal Process | +, -, ×, ÷, FFT, FFTrms ,User Defined Expression. |
| FFT:1Mpts |
Trigger | |
Source | CH1 ,CH2, CH3, CH4, Line, EXT* *dual channel models only |
Trigger Mode | Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence |
Trigger Type | Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus |
Holdoff range | 4ns~10s |
Coupling | AC,DC,LF rej. ,HF rej. ,Noise rej. |
Sensitivity | 1div |
External Trigger | |
Range | ±15V |
Sensitivity | DC ~ 100MHz Approx. 100mV |
100MHz ~ 200MHz Approx. 150mV | |
Input Impedance | 1MΩ±3%~16pF |
Horizontal | |
Time base Range | 1ns/div ~ 100s/div (1-2-5 increments) |
ROLL: 100ms/div ~ 100s/div | |
Pre-trigger | 10 div maximum |
Post-trigger | 2,000,000 div maximum. |
Time base Accuracy | ±50 ppm over any ≥ 1 ms time interval |
Real Time Sample Rate | Per channel 1GSa/s |
Record Length | Max:10Mpts |
Acquisition Mode | Normal, Average, Peak Detect, Single |
Peak Detection | 2ns (typical) |
Average | selectable from 2 to 256 |
X-Y Mode | |
X-Axis Input | Channel 1 |
Y-Axis Input | Channel 2 |
Phase Shift | ±3° at 100kHz |
Cursors and Measurement | |
Cursors | Amplitude, Time, Gating available; Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%) |
Automatic Measurement | 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements |
Control Panel Function | |
Auto counter | 6 digits, range from 2Hz minimum to the rated bandwidth |
Autoset | Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset |
Save Setup | 20set |
Save Waveform | 24set |
Display | |
TFT LCD Type | 8" TFT LCD WVGA color display |
Display Resolution | 800 horizontal × 480 vertical pixels (WVGA) |
Interpolation | Sin(x)/x |
Waveform Display | Dots, vectors, variable persistance (16ms~4s), infinite persistance |
Waveform Update Rate | 120,000 waveforms per second, maximum |
Display Graticule | 8 x 10 divisions |
Display mode | YT ;XY |
Interface | |
USB Port | USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 |
Ethernet(LAN) Port | RJ-45 connector, 10/100Mbps with HP Auto-MDIX |
Go-NoGo BNC | 5V Max/10mA TTL open collector output |
Kensington Style Lock | Rear-panel security slot connects to standard Kensington-style lock. |
Logic analyzer specifications | |
Sample Rate | Per Channel 1GSa/s |
Bandwidth | 200MHz |
Record Length | Per Channel 10M pts (max) |
Input Channels | 16 Digital (D15 - D0) |
Trigger type | Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus |
Thresholds Quad | D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds |
Threshold selections | TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined |
User-defined Threshold Range | ±5V |
Maximum Input Voltage | ±40 V |
Minimum Voltage Swing | ±250 mV |
Vertical Resolution | 1 bit |
Miscellaneous | |
Multi-language menu | Available |
operation environment | Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C. |
On-line help | Available |
Time clock | Time and Date ,Provide the Date/Time for saved data |
Dimensions | 384mmX208mmX127.3mm |
Weight | 3kg |
- Educational Courses
- ICT Product Design
- Embedded Circuit Design
- Automotive Electronics