|
| | |
|
| |
| | |
|
|
Fluke 1503 Insulation Resistance Tester
Manufacturer: FLUKE
Part Number: 1503
Product Options
* denotes required field
NIST Traceable Calibration Certificate*
|
|
Fluke 1503 Insulation Resistance Testers
Features:
- Insulation test range: 0.1 MOhm to 2000 MOhm
- Insulation test voltages: 50 V, 1000 V
- Repetitive or hard-to-reach testing is easy with the remote test probe
- Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
- Auto-discharge of capacitive voltage for added user protection
- AC/DC voltage: 0.1 V to 600 V
- 200 mA Continuity
- Resistance: 0.01 Ohms to 20.00 Ohms
- Save battery power with auto power off
- Read measurements easily with large, backlit display
- CAT IV 600 V overvoltage category rating for added user protection
- Remote probe, test leads, probes and alligator clips included with each tester
- Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
- Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests
- One year warranty
Specifications:
|
AC/DC Voltage Measurement |
| Accuracy |
Range: 600.0 V
Resolution: 0.1V
50 Hz to 400 Hz +/- (% of Rdg + Digits) +/- (2% +3) |
| Input impedance |
3 MOhms (nominal), < 100 pF |
| Common mode rejection ratio (1 kOhms unbalanced): |
> 60 dB at dc, 50 or 60 Hz |
| Overload Protection |
600 V rms or dc |
|
Earth bond resistance measurement |
| Range/Resolution |
| 20.00 Ohm |
0.01 Ohm |
| 200.0 Ohm |
0.1 Ohm |
| 2000 Ohm |
1.0 Ohm |
| 20.00 kOhm |
0.01 kOhm |
|
| Accuracy |
+/- (1.5% +3) |
| Overload Protection |
2 V rms or dc |
| Open Circuit Test Voltage |
> 4.0 V, < 8 V |
| Short circuit current |
> 200.0 mA |
|
Insulation specifications |
| Measurement Range |
0.01 MOhm to 2000 MOhm |
| Test Voltage |
50 V, 1000 V |
| Test Voltage Accuracy |
+ 20%, -0% |
| Short Circuit Current |
1 mA nominal |
| Auto Discharge |
Discahrge time <0.5 second for C= 1uF or less |
| Live Circuit Indicator |
Inhibit test if terminal voltage > 30 V prior to initialization of test |
| Maximum Capacitive Load |
Operable with up to 1 uF load |
| Measure Accuracy: |
50 V: +/-(3% +5)
1000V: +/-(1.5 % + 5) to 2000 MOhm, +/-(10 % + 3) above 2000 MOhm |
|
General Specifications |
| Maximum Voltage Applied to Any Terminal: |
600 V ac rms or dc |
| Storage Temperature |
-40 C to 60 C (-40 F to 140 F) |
| Operating Temperature |
-20 C to 55 C (-4 F to 131 F) |
| Temperature Coefficient |
0.05 x (specified accuracy) per C for temperatures < 18 C or > 28C (< 64 F or > 82 F) |
| Relative Humidity |
| |
0 % to 95 % @ 10 C to 30 C (50 F to 86 F) |
| |
0 % to 75 % @ 30 C to 40 C (86 F to 104 F) |
| |
0 % to 40 % @ 40 C to 55 C (104 F to 131 F) |
|
| Vibration |
Random, 2g, 5-500 Hz per MIL-PRF-28800F, Class 2 Instrument |
| Shock |
1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor) |
| Electromagnetic compatibility: |
In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997) |
| Safety |
Complies with ANSI/ISA 80.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV) |
| Certifications: |
CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition |
| Batteries |
Four AA batteries (NEDA 15A or IEC LR6) |
| Battery Life |
| Insulation test use: |
Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MOhm with a duty cycle of 5 seconds on and 25 seconds off. |
| Resistance measurements: |
Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ohm with a duty cycle of 5 seconds on and 25 seconds off. |
|
| Size |
5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L) |
| Weight |
550 g (1.2 lb) |
| IP Rating |
IP40 |
| Altitude |
Operating: 2000m CAT IV 600 V, 3000 m CAT III 600 V
Non-Operating (Storage): 12,000 m |
| Over-range capability: |
110 % of range |
| Included accessories: |
TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster, and remote probe |
|
The Fluke 1507 Insulation Tester is compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting, commissioning, and preventative maintenance applications.
| |
|
|
|